Atlas Technologies is the manufacturer of concrete plants which are used as mixing devices in the construction industry. The twin shaft mixers are concrete plants used across the industry between the mixer measurements of 0.5 and 5 m3. This is the universal range for all types of concrete with an aggregate of 80 mm and below. These mixers are great in terms of reliability. They are known to reduce the need and cost of maintenance.
The twin shaft mixers that Atlas manufactures are extremely precise and low-maintenance. As a result, they are very affordable to keep. Concrete Mixing tanks include replaceable anti-wear liners. The mixers have paddles inside that perform the mixing action. The mixing paddles come in varying shapes that facilitate and optimize the mixing results. The paddles are fitted to the mixing arms which in turn are bolted to the shaft of the mixer. This construct enables easy service and maintenance of the arms and tips. The shafts are insulated with seals and roller bearings on either end. The seals can be replaced when required.
The twin shafts from Atlas offers single-point greasing options for all their moving parts. Greasing the parts is pretty easy and quick. With just a grease gun pump, you can pour the required amount of grease into the machine to make sure that the machine is well-oiled.
Planetary Gear Boxes
The twin-shaft mixers from Atlas Technologies are heavy-duty systems engineered for productivity. They are designed to perform reliably and without frequent need for maintenance. But there are some specific reasons for us using the planetary gearbox for all our twin shaft mixers.
They come connected with the main shaft via. a gear coupling. This keeps the transfer of forces from the mixing to the output shafts. That gives the twin shaft mixer a long life.
The bearings are set in individual housing which isolates the mixer seals from the bearings, something that is very helpful in events of seal failure. It also makes the system easier to maintain.
Discharge Gate
The discharge door is powered by a pneumatic cylinder. A nylon seal along the perimeter of this door insulates the chamber. The door rotation is programmed in such a way that every time it is closed shut, the seal is contacted and compressed.
Washer
Washing the mixers made by Atlas is equally easy. The mixers have a hose fitted with a heavy spray jet nozzle. Spraying the inside with water jets ensures thorough cleaning of the mixers.
Top Hatch
The top cover is easy to open and close. The top cover is attached to the chamber with twin hinged hatches. Wide and open, it allows easy access to the mixer chamber. The top cover ensures that the insides can be cleaned out perfectly after a day’s work. The top cover is set high which makes unscheduled and preventive maintenance easy. It makes the shutdown period relatively shorter. The top hatch is also very flexible, and equally secure when closed.
Atlas manufactures and installs quality twin shaft mixers in its concrete plants. The concrete plants by Atlas are available in capacities ranging from 10 m3/hr. to 200 m3/hr.
Contact us to know more about the concrete batching plants.
More information About Visit My Website>>https://www.atlastechnologiesindia.com/
Commentaires